11.6.3. 通信系統，操作
對講電話（Gai - Tronics）

 

11.6.3.1. 操作

電話聽筒的使用

廣播模式
在廣播/群講系統上廣播，可將電話聽筒拿離電話架，下按電話聽筒上的壓桿，直接對著電話聽筒的麥克風講話。聲音將會從與系統廣播線相連的廣播/群講站的揚聲器中廣播。

群講模式
當某位廣播/群講系統使用者發布信息，需建立群講通信時，可電話聽筒拿離電話架，做兩向（完全雙向）通話。這可以在任何廣播/群講站的同一群講線上的任何人之間實現。

彎脖式麥克風的使用
彎脖式（與“電話聽筒”對比）麥克風可使操作員不用手操作而發布廣播。彎脖式麥克風只用于廣播，用電話聽筒來進行群講對話。只有按下通信開關（左控制手柄按鈕）時，才能夠?qū)崿F(xiàn)通話。

 

頁碼 篇 日期 名稱 
64/101 EH11-0010 99-04-27 操作手冊 

 

11.7. 使用與駕駛指南

不正確的使用

起重機只能用于其設計用途。如無制造商的書面許可，起重機不可用于其他用途。

熟悉操作指南

除非您已完全熟悉操作指南，否則請勿使用起重機。未經充分培訓而使用起重機為不正確的使用，且可能對操作員與任何在起重機附近工作的人員的安全構成威脅。

受損的起重機

如果起重機被損壞，則不得再使用。一臺受損的起重機的安全系統可能也會失靈，這在運行中可能導致發生完全出乎意料的危險情況。如起重機有任何損壞，必須立即向您的主管或負責機器保養與檢修的人員報告。

搬運集裝箱

不得用吊具推或拉集裝箱來搬移。推拉會對吊具的端部造成損壞。而且也可能使軸桿的鎖銷受損。

系統改造

不得對起重機的結構與系統做任何改造。改造可能改變起重機經設計的運行模式，引發嚴重的事故。
 
11.6.5. Communication system , Operation
Intercom telephone (Gai- - Tronics)
11.6.5.1. Operation
Handset Use
Page Mode
To generate a page on the Page/Party system, lift the handset from the cradle, depress the
pressbar on the handset, and speak directly into the handset microphone. The page will be
broadcast from Page/Party station speakers connected to the system page line.
Party Mode
To establish party line communication when paged by a Page/Party system user, lift the
handset fromthe cradle fortwo--way(fullduplex)communication. Thiscan takeplace withany
person on the same party line at any Page/Party station.
Gooseneck Microphone Use
Gooseneck (vs. handset) microphone allows the operator generate handsfree pages.
Gooseneckmicrophoneisforpageuseonly,usehandsetforpartylineconversation.Operation
is available only when the tangent switch (left controller push button) is depressed.
Page Group Date Description
62/99 EH11- -0010 99- -04- -27 Operator’s manual
11.7. Using and driving instructions
Improper use
The crane is only allowed to be used for the purpose it is designed for. The crane may not be
used for any other purposes without the manufacturer’s written permission.
Acquaintance with operating instructions
You should not use the crane unless you have fully acquainted yourself with the operating in-
structions. Using the crane without adequate training is improper use, and may risk the safety
of the operator and any persons working near the crane.
Damaged crane
The crane may not be used if it is damaged. The safetysystems of a damaged crane mayalso
be out of order, and this may lead to totally unexpected hazard situations in operation. Any
damage on the crane must be reported without delay to your superior or the person in charge
of the maintenance and repair of the machine.
Moving containers
Containers should not be moved by pushing or pulling with the spreader. Pushing and pulling
will cause damage to the end part of the spreader. It is also likely that the locking pins of the
spindles suffer damage.
System alterations
No alterations to the structures and the systems of the crane are allowed. Alterations may
change the designed operation of the crane and lead to serious accidents.