電話和信號分配系統施工說明翻譯-中英對照
部分-24電話SYSTKM
訂約人 提供，安裝，測試和委托一部電話系統， 包括但不是對電話亭限制， 電話分配框架，導管和導線， 象在嚴格的服從地方當局的要求和說明過程中在畫上顯示的那樣的全部，和象此中指定的那樣。
只有一部電話末端櫥(TTC) 為每個零售地區，在那里在這些地區的分配 根據租戶要求提供。
特級市場商業區應該有分開與ils一起的電話系統擁有PABX。
工作的描述
完成包括但不限于如下內容的電話銷售網和私人電話交換機系統：
電話分配裝置
數據/電話通信電子專用自動小交換機(EPABX)
主要分配框架(MDF)
EPABX 外圍設備
操作控制臺
電源設備
電話出路
輔助設備
規章和標準
電話裝置 符合本地電話權力和相關的CCITT建議的要求。
批準制造商
被更以投標方式推薦為他的投標的部分的制造商，在任何場合fo被批準通過
電話系統電報
室內的打電報的兩對和多雙股電線是fo是隔離的聚乙烯， 裝成罐頭的純銅導體，扭曲進對，鋁聚酯帶子的編碼，同時包裹的顏色和灰色的PVC 護套。 售票員的最小直徑是成為0.6毫米 下水道電線 被在每封電報內提供，對10根雙股電線的我的0.4毫米直徑和為電纜用超過10 對0.6毫米直徑。
給安裝在導管在技術服務電弧內關于吸溫的n的Multipair電報，防水，聚乙烯隔離，裝成罐頭固體銅幣售票員， 最小0，6毫米直徑， 進編碼的對，顏色的twisled，帶有alumini /.ed polycsicr 帶子，PVC 帶子，鋁或者銅護套和PVC在護套上方的包裹。
電報電弧成為150 V的最高工作電壓的raled， 隨著10，000 megaohm/km的絕緣電阻，和在使用核心核心和核心地球的500 V d.c測試。
EPABX 完全成為電子，數字化儲存的程序，微處理器用LSI 開關電路控制。 liPABX 是作為全部應用的一個普遍的電話交換機系統為使用設計的。 Jt 可能連接DTMF 和rolary的任何combinaiion 對EPABX 撥電話， 在那些EPABX內和沒有那些EPABX 和沒有修改的那些需要根據需要隨著那些供應的制造商的模件接口制造
能力是如下：
外部干線： 象在畫上顯示的那樣
內部的擴展： 象在畫上顯示的那樣
操作控制臺： 一
電源：
主要能力： 220 V(+ /-15%)
a.c。 單相，50赫茲
電池：
相對濕度：
相容的車站： 兩電線和3 個電線標準
連續的脈搏或者DTMF 撥
交換應該對于聲音裝有全部標準設備和
通訊。 下列特征應該在EPABX里至少可提供。
1)站對站呼叫
2)直接的外面撥
3)直接的向內的撥
4)執行者代理傭金
5)在忙上的陣營
6)調查打電話
7)叫轉移
8)撥操作者的入口
9)記得撥號音
Sana的Cily 商業區
給停業襯以警告
劈開。
連續的電話
13)停電轉移
14)回話為樹干排隊
15)直接的距離用糧食撥為：
考慮到至少如下內容：
1)數據鏈路
2)Mulli 媒介綜合
3)ISDN 兼容性
4)語音郵件
5)GSM
6)在站點傳呼系統上
B。 電話擴展應該被歸類在里 3 個種類看他們的
干線的可接近。
i. 非限制的( 正常),即 內部的電話
ii. 半限制,( 通過用戶)即 外部電話
ii. 限制,{通過操作者)即 數據打電話
C。 那些能力為車站提供號碼應該給產品被分配對
時間安裝根據一用戶想要編號計劃和對
允許重新分配沒有要求在使用中允許人員行動當時
數目改變。 編號的體制應該利用一個編號計劃
應該沒有硬件或者導線改變是可變的。
操作控制臺特征
操作控制臺應該有至少下列的特征：
1.設備任何個別的樹干或者延長線的低檢查地位。
2.戒指什么時候無設備對給忙擴展適合外部電話轉移。
3.對接線員的自動回車，如果一份擴展文件在30秒內不在外線電話接。
4.調用編號展示。
6.優先權和進入到建立的通訊經由一種特別的音調到兩個談話的聚會打電話。
7.劈開。
8.叫擁有物。
9.簡縮撥號。
10.自動的電話監督。
11.錯誤指示
12.自動和手動在開關的對夜晚服務。
電源
電源組成一個調節的48個V個直接的喂的單位， 由于電池操作和當交流電源的恢復時的自動回車的有連續的轉接的涓流充電的一個充電的附件。
電池應該按比例繪制領導與足夠的3個小時緊急操作的能力一起的酸類型深循環在高峰運輸?shù)臅r(shí)期。
因?yàn)槭湛s和
輸出電壓的那些充電整流器的保持在合理限制之內并且獨立
(7%從空載到滿負荷裝)。
電話分線網
1.總則
電話安裝的分線網必須完全與其它系統導線分開。
2.電話導線
室內安裝的多股電線應該由雙對導線纏繞而成，并有絕緣襯層，鋁箔和P.V.C. 護套包裹。導線的直徑為0.6毫米。
單導線分線口的單股電纜必須采用P.V.C.隔離材料和P.V.C.護套。
室外安裝的多股電話電纜必須采用帶導體鋼絲的聚乙烯護套和全聚乙烯護套。
地下電纜必須填充有礦脂防止水分進入。
1-10對的多股電話電纜應該包括一根0.4米長的地接線，超過10對的多股電纜應該包括一根0.6米長的地接線。
3.主接線板(MDF)
尺寸如圖紙所示：
對所有干線電路進行過壓保護，是為了安裝圖紙要求提供氣體放電管保護裝置。
使用標簽按照對應的線路和擴展對終端進行標識；提議編號方案必須提交獲得通過。內部和外部線路的導線的鋪設必須位于雙框架主接線板MDF和跨接線之間。
4.電話終端柜
電話終端柜應該裝備有一多功能類型薄金屬板或者使用PVC材料對表面進行包裹或者(安裝圖紙所示，安裝有帶有插頭或者沖壓終端模塊的埋入裝置。
電話終端柜必須安裝必要的接線板用于斷開或搭接電纜。
所有電話終端柜必須有銘牌標識，銘牌使用不透明的塑料薄板，要求黑底白字。
5.電話接線口
電話接線口應該是RJ45埋入式，由一個黑色硬質P.V.C 插接器組塊并帶有4個終端接頭。
正面的接線口必須為其它是電氣裝置的相同的材料，在電話接線口電弧處的電源插座。
7.設備數據
完成所有組件的資料和適用的目錄。全部操作設備的詳細目錄都指定有適合備候方案可選擇。
接地
電話和信號分配系統的地接必須安裝在電話裝置的入口和每個電話和信號裝置的裝置柜中， 要求符合EIA/TIA 607。設備支架必須和電路安全地接線路連接。
A 總則
火災警報和檢測系統必須裝備有根據日夜接受的敏感度不同，類似模擬可編址控制面板。 系統具有4 個報警延遲線路封閉環監督。
電纜為1.5平方米用4 種顏色纏繞保護。系統和光電煙霧報警器連接，設定升高檢測器，手動拉力站點和警鈴的比率。必須提供AHU的聯動裝置和風扇，以及消防泵的信號通知。
調頻200 和C02地區的防火設備接受檢測器在不同的區域上傳來的信號防止誤報警。 每個檢測器有一個自動調節面板自身狀況的地址和數碼。
系統有消防人員電話功能，營救區域通訊，以及監控風扇和擋板控制并進行反饋的能力。
投標人在標書中推薦的制作商，在任何情況下都必須獲得工程師的批準。
B.說明
1.本節的內容包括微處理器控制，智能火災警報報告設備的供貨、安裝和連接；要求形成一套完整協調系統并適合操作。包括但不限于：如圖所示，警報起動設備、警報通知裝置、控制面板、輔助控制裝置、預報信號和導線。
2.火災警報系統符合NFPA 標準第72條房屋保護信號系統的要求，說明修改和補充部分除外，這部分 實行更嚴格的要求。系統使用電力監督并監控全部導體的集成度。
3. 火災警報系統制造商必須采用最新技術并保證高品質。
4.FACP 和外部設備必須由單個制造商(或者分區) 100%生產。
C. 范圍
1.一份新的智能化的報告和微處理器火災控制探測系統必須按照NFPA 規格7（等級A）中的信號線路電路的要求進行編碼。
2.基本性能：
a. 警報、故障和監視信號形成全部智能化的報告設備采用NFPA 規格7（等級A）中的信號線路電路的要求進行編碼。
b. 啟動裝置電路(IDC)的組線等級為B(NFPA規格B)。
c. 通知設備電路(NAC) 的組線等級為B (NFPA規格Y)。
d. 數字化的電子信號 采用校驗數位或者多次查詢方式。
e.單接地或者系統信號線路電路的開出不得造成系統故障，無法操作或者喪失警報能力。
f．到達主要FACP的報警信號不得隨即發生停電(或者停機)，直到報警信號已經處理并且記錄。
3.基本的系統功能操作
當檢測到一種火災警報條件，并通過系統啟動裝置發出報告，下列功能 立即發生。
a. 系統警報LED。
b. 控制面板里的一個本地壓力電信號發出鳴聲。
c. 逆光字符的LCD 顯示全部火災警報狀態相關的信息，包括警報點類型和在被保護房屋的位置。
d. 打印設備和歷史貯存 記錄每起新火災警報控制面板相關的信息，包括時間和日期。
e. 所有設定的系統輸出程序可通過事件方程式控制，并通過特殊點啟動并執行，相關系統輸出(警報通知裝置和/或繼電器)啟動。
D. 建議
1.總則
全部建議的a.Three 副本 被為包括的回顧提交Architect/Rngineer，但不是對下列制造商限制： 愛德華茲，Pyrotronics 和單純。
b。 全部提到制造商的型號和其它有關的信息質量。 只要最小標準電弧見面，來自其它制造商的Kquivalcnt 設備可能代替被指定的設備。
c.For 設備除了指定， 訂約人 提供這樣的代替者設備等于的證據或者超過特征，功能，性能和被指定的設備的質量。
2.工作圖
a。 足夠的信息，清楚提出， 被包括確定服從
以及圖紙和說明。
b。 包括制造商的名字(s)，型號，等級，電耗，
設備布局，設備安排，完成導線點對點的圖解，
以及導管布局。
c。 顯示預報信號布局，構造和終止。
手冊
a。 同時提交用 工作圖， 完成操作和
維護手冊列舉包括技術數據的制造商的名字(s)
床單。
b。 布線圖表明內部去項目每一個的導線的設備的 和
在設備的項目之間的相互聯系。
c。 提供給，詳細的操作的清楚和簡明的描述，
對正確地操作設備和系統要求的信息。
軟件修改。
a。 提供訓練并且授權技師執行全部的一家工廠的服務； ccliir； 場所的iin 不超過4個小時。
b. 提供全部必要的硬件、軟件、編程工具以及修改站點火災警報系統所需的文檔。修改包括設備、電路、區域和變更系統操作，以及裝置和區域常用電纜變更的增加和刪除。系統結構和軟件對現場軟件修改的類型和程度沒有限制范圍。軟件修改要求在系統不關機或者損失防火系統性能的條件下進行。
5.證明
連同提交的工作圖建議，提交一份從主要設備制造商的證明材料，表明建議的安裝監督人和合同維護提議的執行者是主要設備制造商所授權的代表。在證明中列出姓名及地址。
E.保證書
合同中全部執行作業、材料和提供的設備必須保證沒有缺陷，并保證從接受之日起至少一(1)年期間保持如此。在這個缺陷修正期間，維修、勞力和材料的全部費用列入投標費用中。
F. 適用的標準和規格
下面列舉的規格和標準為本規格說明的一部分。 系統 完全遵循這些標準的最新版本。
a. 美國國家防火學會(NFPA) - 美國：
b. 承保人實驗室股份有限公司 (UL) - 美國：
c. 有審判權(AHJ)的權力當局的全部要求。
G. 產品
1.設備和材料，總則：
a. 全部設備和零部件必須為全新，并且是制造商當前生產的模型。必須對材料、器具、裝置和設備進行測試，并為全國性認可的贊成代理機構列舉為保護性信號系統，采用國家火災警報代碼。
b. 全部設備和零部件必須嚴格按照制造商的建議進行安裝，在安裝前，所有的組線示意圖、圖解和物理設備尺寸等參考制造商的安裝手冊。
c. 全部設備必須與墻和天花板/地板組件相連, 并且在適當?shù)奈恢冒惭b牢固( 例如,檢測器不僅僅懸掛在天花板旁)。緊固件和支撐物要求有足夠的支撐負荷。
2.導管和導線
a.導管
i. 暴露的導管必須使用大型量規電鍍鋼導管并符合國家電器規范(全國廣播公司)、當?shù)?nbsp; 以及國家的要求；
ii. 如果有可能，全部導線必須安裝在導管或者電線保護管里。導管填飽不超過內部橫截面積的40%，單個導管內要求能容納3 道或更多電纜。
iii.電報必須與任帶電導體，或者等級1電路分離，并且不允許安置任何導管、分線盒或者電線保護管里。
iv.24伏特的導線控制、警報通知、緊急事件通訊和相似的動力限制輔助功能可以在相同的導管里作為起動和信號線路電路使用。全部電路配有瞬時抑制設備，系統用于允許全部電路同時進行操作而沒有干擾或者損失或者信號。
v. 除了FACP制造商說明的地方，導管不得進入火災警報控制面板，或者任何其它遙遠安裝的控制面板設備或者后部檔板。
vi. 導管最小長度為25mm；
b. 導線
i.全部火災警報系統導線為全新。
ii.導線必須符合當?shù)�、�?guó)家和全國代碼，以及由制造商推薦火災警報系統使用的導線類型。 導線的數目和尺寸必須按照火災警報系統制造商建議，通常為1.5 mm2。
iii.全部電線和電纜為公認的測試機構列舉為保護性信號系統。
iv.不在導管里安裝的電線和電纜必須有防火等級要求，符合NFPA 70 ( 例如FPLR)或者(FP-200)的規定。
v.全部領域?qū)Ь�必須完全監控。
c.啟動電路必須按照服務種類電路進行設定(手動、吸煙和水流)，不允許使用混合種類電路， 除在信號通知線電路連接在智能化的報告的設備上。
d.火災警報控制面板和一條單獨分電路連接，最大電流值20安培。 這條電路稱為火災警報的主電源接線板。 火災警報控制面板主電源導線為4rnm2�？刂泼姘骞裢ㄟ^(guò)基礎桿固定牢固。
3.主要火災警報控制面板
FACP包含一個含微處理器的中央處理器(CPU)。CPU 與用來構成系統的下列設備型號進行信息交流并且加以控制：智能化的檢測器、可編址模件、打印機、預報信號和其它系統控制裝置。
系統一般的操作
i.火災警報控制面板包括特征鮮明的操作界面控制和通知面板，包括背景光液晶顯示屏，單個，顏色編碼系統LBDs，以及火災警報系統的領域編程和控制的一個字母數字的小鍵盤。
ii.系統當前程序的全部編程和編輯必須能夠在沒有專門設備，并不打斷火災警報控制面板的警報監控功能的情況下進行。
iii.FACP 提供下列特征：
漂流補償延長探測器周期的準確的。
靈敏度試驗，滿足NFPA 72，第5章的要求。
維修警戒對過度煙霧報警器灰塵或者灰塵積累發出警告。
系統狀況包括顯示在打印機上。
警報證實，帶有證實計量器
PAS報警延遲，滿足NFPA 72 3-8.3 要求。
迅速查找手冊站點(少于2秒)報告。
一般控制的非警報點(非火災)。
定期檢測器測試，被軟件自動處理，
先進的火警告的預警報。
穿過有驚慌地算兩個檢測器的能力把分成若干區，二
3月時間和暫時的編碼的選擇。 走試驗，帶有兩個檢測器的檢查開始相同的地址。 非火的行動的控制在時間以前，帶有假日日程。 天/夜晚檢測器敏感性的自動的調整。 設備出毛病為睡地區控制。
jntral 微處理器
微處理器單位 與聯系，班長，并且用控制面板控制全部外部接口。 它 為系統程序存儲器包括EPROM； 建造細節的程序存儲器的非易失性存儲器； 并且"看狗"背叛并且報告微處理器故障的定時器電路。 微處理器單位 包含并且執行全部控制對事件具體的aclion花費的計劃一種警報狀況被系統識別。 這樣的控制 -在非易失性可編程序記憶內舉行的計劃 的以事件，并且 nof被丟失即使主要的系統和次要停電發生。 微處理器單位也 為系統顯示器，打印機和歷史文件的時間注釋提供一臺實時鐘。 如果主要和二級電源失敗系統，時間和山谷 不失去。 實時時鐘可能也用來控制al 編程序次對日子，wcck的日子，和ycar的日子的非火功能。 展示
展示 提供被系統操作員使用的全部控制和指標并且可以習慣于程序全部系統操作的參數。
展示 包括地位全部智能化的檢測器，addressable 模件和軟件區域的信息和風俗文字?jǐn)?shù)字的標簽。
展示 提供80－charactcr背后照明的文字?jǐn)?shù)字的液晶顯示屏(LCD)。 它也 提供 表明下列系統參數的地位的5個Lighl Hmitting二極管(LED)： 交流電源，系統警報，系統麻煩，信號使寂靜，監督，以及預警報。
展示 預防鑰匙有控制功率接觸袖珍鍵盤命令全部系統函數， 任何按字母順序或者數值的信息的進入，以及領域編程，兩不同的口令水平 被提供防止未被授權的系統控制或者編程。
展示 包括下列操作者功能： 顯著寂靜，RESHT，操練，并且承認
說明線電路(SLC)
i. SLC接口 提供權力并且與聰明檢測器(ionizalion進行信息交流。 光電，或者熱)和智能化的模件(監視器或者控制)。 這 被在一個單個的SLC 環上方完成。
11.環接口董事會 得到模擬信息從全部聰明背叛者(帽子 處理低確定， 是否正常，每個檢測器的警報還是麻煩條件cxisl。 軟件 自動通過調整以求環境因素的影響，在每個檢測器里包括灰塵的積累保持檢測器要求的敏感級。 模擬信息也 用于自動的察覺者測試，和為檢測器維修要求的自動的測定。
iii. 檢測器軟件 見到新澤西TA 72，第7章要求。
iv. 檢測器軟件 允許手動或者自動敏感性調整。
英尺 連續的接口
i. 在火災警報控制面板和電子數據處理(EDP)外圍設備之間的一個接口 被提供。
ii. 接口 允許使用打印機，CRT 監視器和PC 兼容計算機。
在里。 接口 包括允許離場所的在標準撥號電話線上方的FACP的監控的特別的協議方法。 這輔助能力 允許全部地位信息的遙遠測量結果輸出值，包括模擬價值，并且在被使用時， 不干擾或者降低FACP行動。 H 允許遙遠FACP告知，重新安放，或者用這種方式的顯著寂靜。 它也 允許檢測器敏感性和歷史文件的測量結果輸出值的調整。
iv. 港口適合可選擇預報信號和遙遠的LCD的連續連接展示 被提供。
v. 接口可能是一個ProprietaryReceiving單位的網絡連接的usexl。
控制面板 被安放在適于表面或者半flushmounting一只櫥里。 內閣和正面 是保護的腐蝕，給一件銹resistantprime 外套， 制造商標準finish.The 門 提供一鍵鎖并且 包括一玻璃或者其它透明
為全部indicators.All接口和associafcd 設備的觀看打開 被保護， 他們不 beaffected 以電壓急劇上升或者與一致插入式模件 為NFPA 72提供的standards.Optional的產品transients， 第4章作為一臺數字化的警報通信員發送器的發送器aswell。
一個可選擇的模件 預防8 形式C 接替在5.0捕老鼠接替 跟蹤電源
電源 作用于220 VAC，50赫茲，并且 提供全部必要
FACP的能力。
它 提供可用的通知器具權力的足夠的電流，使用一個接通的24個VDC 管理者。 它 提供一個充電器24個小時或者備用品(使用雙重匯率給充電)
快的電池的技術再?zèng)_鋒。
ll 預防甚低頻掠過地球發現電路，對敏感的addressable 模能檢測地球錯誤。
節(5)3部分
溫度系數(PTC)電阻器。 吃電池電壓和充電電流，
v. 它 是力量限制的使用Positivi vi。 它 給indi提供可選擇的米'
領域?qū)Ь�接線板
inal塊 是使用的一種可移動，插入式的類型。 是永久的接線板
對于便于服務全部小組I/O 導線terrr來說
干旱有足夠的tf的能力
修理不可接受。
操作員控制
i. 承認開關：
a。 控制面板的活動承認s
和/或麻煩使 寂靜那些piczo 地方小組電氣信號并且兌換那些警報和來自閃爍方式的LHDs麻煩隨著穩定在上方式。 如果多次警報或者麻煩狀態存在，這個開關的沮喪 發展LCD 對下一次警報或者麻煩狀態展示的80個字符。
b。 沮喪(他承認全部開關使 也寂靜遙遠預報信號
pic/o sounders。
ii. 顯著寂靜開關： 信號寂靜開關的活動 引起全部編程序的警報通知器具和接替在一種警報條件之后返回正常狀態。 通過這個開關是silenceable的通知電路和接替的選擇 完全是在全部適用的標準范圍之內可編程序領域。 FACP軟件 包括寂靜抑制和汽車寂靜定時器。
iii. 系統復位開關： 系統復位開關的活動 引起全部通過電子拴上的起動設備， 器具或者軟件7Oncs，和全部相關輸出裝置和電路，返回他們的正常狀態。
舉行系統復位，開關 進行一個燈測試函數。
訓練(撤出)接通。
鉆開關 開動全部notificatio
拴上直到小組被寂靜或者重新安放。
訓練functic
打印機
打印機 提供硬拷貝全部變化在系統的sfatus的打印資料和 調節把這樣的打印資料蓋上天的現時和日期。 打印機 每線是有80個字符的標準車廂并且 使用標準別針喂的紙。 打印機 被在一只在桌面或者桌子上適于安排的單獨的櫥里隨函附上。 打印機 使用一個接口遵循Flcctrical 工業協會標準與控制面板聯系。
Prograss 領域
系統 是可編程序的， configurable 和沒有那些對特別工具的需要或者電子設備在那些領域內可擴大并且要求 不替換的電子集成電路的領域。
全部編程可能被通過標準FACP 小型鍵盤完成。 全部領域確定計劃 被儲存在非易失性存儲器里。 當它被安裝時，編程功能 被可能被為系統特別定義的一個口令使成為可能。 口令保護的兩步 被除一只鍵鎖櫥之外還提供。 一步用于地位水平
把分成若干區的變化使無能力或者手工在上/命令關上。 一秒(高水平)用于實際更換計劃信息。
v. 程序編輯不得干擾正常的操作和防火保護。如果在程序操作期間，探測到火災條件，系統將退出程序編輯，并按照程序執行火災保護功能。
vi. 提供一個特別的程序檢查功能檢查普通操作者的錯誤。
vii.提供自動編程功能(自學習系統)能加快系統安裝啟動，方便系統操作。
viii. 就靈活性而言，必須提供離線編程功能，具有分批上載/下載功能。
P.具體系統操作。
i. 煙霧報警器敏感性調節：提供任何或者全部模擬敏感性智能化的煙霧報警器的調節方法，可以從系統小型鍵盤輸入。
ii. 警報驗證：在系統里的每個智能化地址煙霧報警器必須獨立選擇并且是能夠測試多種狀況的警報裝置。 警報驗證延遲為可編程序，從5秒到30秒，每個檢測器能用于驗證選擇。 FACP在每個檢測器進入驗證周期后進行計數。這些計數可以按照操作員的命令顯示或重新設定。
iii. 點無效：在系統里的任何設備可通過系統小型鍵盤使其有效或者無效。
iv. 點讀數：系統能顯示或者打印下列問題狀況診斷功能：
a.設備地位
b.設備類型
c.通用設備標簽
d.模擬檢測器數值查看
e.裝置區域指定
f.全部程序參數
v.系統狀況報告：系統的操作員付出的命令和狀況報告可以經打印機打印出來，并列舉全部系統狀況。
vi. 系統運行歷史記錄記錄和報告：火災警報控制面板包含一個歷史記錄緩沖區，能儲存多達650次系統警報/故障/ 操作行為。 這些行為中的每個都將被儲存，并標上時間動作時間和日期。 歷史記錄緩沖區的內容可進行手工評論，每次一次事件，或者全部打印出來。
雖然前景歷史記錄緩沖區可方便用戶進行清理，但是保留有背景和非清除緩沖區提供最后650次系統事件。
歷史記錄緩沖區使用非易失性存儲器。 因?yàn)橄到y(tǒng)不允許使用易失性存儲器進行歷史貯存。
vii. 自動的檢測器維修警報：火災警報控制面板可以自動詢問每個煙霧報警器，并分析當時發出響應的檢測器。
如果系統里的任何智能化的煙霧報警器在正常的限制條件下或者高于正常的限制條件進行讀數反應，然后系統 進入故障方式，并且特別的檢測器在系統顯示器上顯示，并選擇打印機打印。該特征不允許禁止警報條件的接受。在系統里不 需要任何專用硬件設備，特別的工具或者計算機專門技能執行。
viii. 預警報的功能：系統提供2個級別的預警報警告，對火災形勢的發出預告。2個級別的預警報都可以完全在現場調試。第1個級別在控制面板商給出一個音響指示。 第2個級別 給一個音響指示并啟動控制繼電器。系統能夠在預警報級別啟動局部音響器，幫助避免噪音警報。
ix. 軟件區域： FACP提供足夠的軟件區域。全部地址設備為現場編程序，用于控制活動和報告目歸入這些區域。
4.系統部件
a.可編程序的電子音響器。
i.電子音響器作用24 V dc。
ii.電子音響器可以在不需要特別工具的條件下，進行現場程控，提供慢波、連續或者間斷的音調，距離設備3米范圍聲音標準為至少90 dBA。
iii.按照計劃采用埋入式或者表面安裝。
b.每個音響器的頻閃光
i.在24 V dc條件下使用。
ii.滿足ADA的要求并且達到下列標準：
-最大脈沖范圍2/10ths每秒。
-頻閃強度，滿足UL 1971的要求。
-閃光比率，滿足UL 1971的要求。
-裝置離地面2米，置于空間內最高層地面之上，或者在天花板下面的15厘米，取更低的數值。
c.聲音/視頻組合裝置
i. 必須滿足A章節關于聲音的適用要求；
ii. 必須滿足B章節關于視頻的要求；
d.地址裝置設備 – 總則
i. 地址設備提供地址設定方式，使用旋轉數字開關。
ii. 地址設備使用簡單安裝并且保持十進制(1-10)類型地址開關。使用二進制的地址確定方法的設備，例如傾向開關，很難安裝并容易發生安裝錯誤。這類設備不允許代替。
iii.檢測器為智能和可寫地址類型，并且和火災警報控制面板連接電路的2個導線連接。
iv.地址煙霧和熱檢測器提供雙警報，LEDs在正常狀態下閃爍，表明檢測器是在正常的控制面板的通訊條件下操作的，并且兩LED在控制面板有穩定的照明，表明一種警報條件已經發現。如果有要求，通過系統現場程序選擇檢測器LBD的閃爍的方式。 在基礎中提供一個輸出連接連接外部遠程警報LED。
v. 煙霧報警器敏感性通過火災警報控制面板確定，并通過系統的現場編程，在現場調節。敏感性可以在一天內通過控制面板自動調節。
vi. 使用FACP軟件，探測器可以自動補償灰塵積累和其它緩慢的環境變化影響對其性能造成的影響。檢測器必須滿足NFPA72第7章的校驗靈敏度的測試要求。
vii. 檢測器安裝在天花板上，并且包括一個防填塞物的擰鎖基礎。提供一個內置式可選擇基礎(局部) 音響器，額定最小值為 85 dBA。
Viii.檢測器在模擬一警報狀態并且將狀態報告給控制面板出提供測試手段。這樣測試可通過檢測器本身起動或者由控制面板發出命令進行遠程啟動。
ix. 檢測器也可以儲存內部鑒定類型代碼，這樣控制面板可以確定設備類型(電離、照片、熱傳感)。
c.地址引線盒(手動站點)
i. 地址引線盒，在控制面板的命令上，將代表手動轉換狀況的數據傳送給控制面板。使用一個主要操作測試設定鎖定，在實際緊急操作之后進行設定，除了通過使用一把鑰匙，不能被恢復成正常的操作用途。
ii.全部操作站點有一個積極的，直觀的跡象顯示操作，并使用按鍵類型進行再設定。
iii.手動站點使用勒克森聚碳酸酯纖維(Lexan)建造，在面板上提供有清楚可見操作指示。有“FIRE”字樣站點位置，45毫米或者更大。
iv.按照計劃站點必須適用于表明安裝或者半埋入式安裝，安裝位置不得低于地板的1米，也不得超過地板1.4米
f.智能化光電煙霧報警器 - 高性能類型(HPO)
檢測器使用光電(光閃射)原則測量煙霧密度，并且通過控制面板給出命令，把數據送到模擬煙密度水平的控制面板。一旦升溫過快速，增加敏感性對較小煙霧粒子作出反應。
g.智能熱檢測器
i.熱檢測器為智能地址設備，額定穩定在58℃，并且每分鐘升溫設定為9.4℃。通過2天導線連接火災警報控制面板信號線電路。可以通過一個SLC環路連接99個智能熱檢測器。
ii.檢測器使用一臺電子傳感器測量引起的熱狀況，通過控制面板發出命令，把數據送到模擬煙密度水平的控制面板。
iii.提供一個可選擇的智能熱檢測器 適用于不要求額定或升溫測量的應用。
h.智能化導管煙霧報警器
i.導管煙霧報警器可容納一臺智能化的電離傳感器或者一臺智能化光電傳感器，提供連續的模擬監控和控制面板的警報驗證。
ii.當探測到足夠的煙霧時， FACP 起動報警信號，采用適當?shù)男袆?dòng)改變空氣處理系統，防止有毒的煙和火氣體在系統服務區域的迅速擴散。
j.地址干式接點監視器模件
i. 提供地址監視器模件連接常規警報啟動裝置的監督IEC區域 (任何N.O. 干式接點設備)和火災警報控制面板信號通知電路SLC)環路。
ii. 監視器模件安裝在一個10厘米見方，54毫米深的電氣箱內。
i. IDC 區域可與D式或者B式操作電纜連接。提供LED，在正常狀態下閃爍，指示監視器模件處于操作中，并且處于有規律的與控制面板的聯系過程中。
k.雙線檢測器監視器模件
i. 提供地址監視器模件連接IDC監督區域；通常使用2線煙霧探測器或警報啟動設備；
ii. 兩線監視器模件安裝一個10厘米見方，54毫米深的電氣箱內，或者在一個可選擇的backbox。
iii.IDC區域可使用A級或者B級(D式或者B式)線路操作。提供的LED可以正常狀態下閃爍，表明監視器模件正在操作過程中，以及在有規律的與控制面板的聯系過程中。
I.地址控制模塊
i. 提供地址控制模塊對傳統的通知裝置電路(NAC)的操作進行監督和控制；使用24 V dc供電；將音頻/視覺通知裝置極化。對風扇關閉和其它輔助控制操作來說，控制模塊可以設定為干式接點繼電器。
ii. 兩線監視器模件安裝一個10厘米見方，54毫米深的電氣箱內，或者在一個可選擇的backbox。
iii. 電路NAC控制模塊可使用電纜Z式或者Y式導線(A / B級)；感應信號可以達加到1 安培A/V，或者2 安培的電阻A/V信號，或者干式接點(C式)繼電器。這種繼電器線圈可以通過磁性鎖存，減小導線的連接要求，并且保證100%的輔助繼電器或者NACs，在相同的電線上同時提供電力。
iv. 通過分離的電力線圈，從主火災警報控制面板或監督遠程供電上提供音頻/視覺電源。
v. 使用十進制開關提供控制模塊地址設定方式，并且也可以儲存內部的驗證碼，控制面板 使用這些驗證碼鑒定這類型設備。提供的LED可以正常狀態下閃爍，表明監視器模件正在操作過程中，以及在有規律的與控制面板的聯系過程中。
vi. 提供磁性開關測試，在沒有開啟或斷開導線NAC的情況下，測試模件。
vii. 控制模塊適于導向應用并且設定為至少6 安培30 V dc。
m.隔離器模件
i. 提供隔離器模件，在一個SLC 環路上，自動隔離線對線短路。隔離器模件必須限制模件或測試器數量，可能因SIC 環路的短路造成無法使用。每個樓層或建筑物的保護區域至少提供一個隔離器模件。
ii.如果發生線對線短路，隔離器模件將自動斷路(斷開)SLC環路。 當短路狀態被改正后，
隔離器模件自動再次接通被獨立的部分；
iii.隔離器模件不需要任何地址設定，操作完全自動，無需更換繼電器或者調節一個隔離器模件。
iv. 隔離器模件安裝在一個標準100mm深的電子盒或者表面安裝的backbox中。提供的LED可以正常狀態下閃爍，表明監視器模件正在操作過程中，以及在有規律的閃爍，表明短路電路已經探測到并已經隔離。
n.水流開關
i. 水流開關必須完整、采用機械裝置、非編碼以及費積累上延遲型；
ii.流動開關有警報輸送延遲時間，從0秒到60秒可調節。初始設定為30；45秒。
iii.流動開關離安裝位置至少毫米300，可以改變水流方向，離閥門的最小距離為900毫米。
p.灑水器和消防水管閥門監督開關
i.每個灑水器系統的給水控制閥立管或者區域控制閥，以及每個調壓豎管系統立管控制閥必須裝有一個監督開關。立管軟管閥門和測試以及排水閥必須裝備有監督開關。
ii.每個位置的指標閥門(PIV)或者主閘閥門必須裝備有監督開關。
iii.安裝開關以便不干擾閥門的正常操作，要求再2周轉內可以對閥門實現關閉，柄部再移動的時候最大距離正常位置的5分之1；
iv.機制安置再一個不受氣候影響的鋁材料制成外殼內，提供一個19毫米螺紋導管入口用于連接閥門附件的必要設備。
v. 開關房使用烤搪瓷材料涂裝；
vi整個安裝總裝不允許有堵塞物，在外殼移動的或裝置從安裝位置移開時候?qū)е麻_(kāi)關啟動。
vii. 提供監督開關在該區域連接，由機械承包商負責安裝，
q.風扇關閉設備。
提供關閉風扇和空氣處理單裝置的繼電器。
r.門釋放裝置和防火擋板
門釋放裝置使用電力啟動并且通過電磁控制煙霧門處于開啟位置；
火警報系統的操作將開啟門并且把信號傳送到防火擋板。
s. 序列連結信號器要求
i. 信號器通過通訊環路與火警報控制面板連接，并且通告系統全部區域。多達10信號器可連接通訊環路。
ii. 信號器只需要4條電線連接FACP。
iii. 信號器在每區域提供紅色警LED和黃色故障LED。信號器裝備有"在線"局部壓電音響器，局部應答/試驗開關燈和通用區域/ 功能鑒定標簽。
iv. 信號器開關可用于系統控制，例如全球應答，全球信號靜默和全球系統復位。
t.LCD 文字?jǐn)?shù)字顯示信號器：
i. 文字?jǐn)?shù)字的顯示信號器是監督、遠程定位背后光LCD 顯示，包含至少80 字符(80)警報通知，裝置使用清晰的英語文本。
ii. LCD信號器在系統里顯示全部警報和故障條件。
iii. 信號器連接一個雙線接口。雙線連接的距離為1800毫米。信號可由一臺可選擇中繼器在900毫米范圍內增值。提供一個可選擇的模件允許E1A-485信號通過光學纖維傳輸。
iv. 系統允許至少4 LCD信號器。每個LCD有下列系統函數：應答、靜默和重新設定。
5.電池
a. 12伏特，凝膠類型(兩者兼具)。
b.電池有足夠的電力提供不少于24個小時為火警報系統提供電力，以及在正常的AC停電的5分鐘供電。
c.電池完全免維修。沒有液體要求。 沒有流體水平檢測、重新補充物、濺出和滲漏。
6.火災電話
當火災電話的手持話機插進入火災電話插口時， 火災電話區域的控制面板上的LED開始閃爍, 一個聲音信號表明手持話機已經進入。當選擇火災電話區域時，發出聲音的信號立即停止。
通常，一個火災電話區域只能選一次。選擇一個區域的手持話機就無法選擇其它區域。需要同時選擇多個區域時，選擇同線電話。
執行
1.根據NEC，NFPA 72，當?shù)睾蜖顟B(tài)碼進行安裝， 并且在圖紙上標出，標出制造商向推薦的主要設備。
2.全部導管、分線盒、導管支持和吊架必須在完成的地區隱藏，可在未完成的地區內暴露。在系統編程和測試期間之前不安裝煙霧報警器。 如果在這個時期需要進行施工，必須采取措施保護煙霧報警器免受污染和物理?yè)p害。
3.在完工區域，全部火災探測器和警報系統設備、控制面板和遠程信號器必須選擇埋入式安裝，在未完成地區可以采用表明安裝。
4.測試
提供一位有資格，工廠訓練的工程師或者技師的服務，要求必須經過制造商授權，在火災警報設備監督技術完全勝任，并且參加所有調整期間的系統測試。 測試符合NFPA 72，第七章要求。
a.在電纜和電線通電前，檢查是否正確連接、測試是否短路、接地故障、連續性和絕緣性。
b.關閉每個灑水器系統水流閥門，并驗證適合的FACP監督的警報。
c.全部水流開關的驗證活動。
d.打開起動設備電路和驗證故障信號的啟動。
e.打開短路信號線路電路并驗證故障信號的啟動。
f.打開短路通知裝置電路并驗證故障信號的啟動。
g.全部電路地接和驗證反應或者故障信號。
h. 檢查全部警報通知設備的存在和音頻可聽度。
j.使用移位測試檢查全部智能化的煙霧報警器的安裝、監督和操作。
k.在系統引進每個系統要求測試的火災警報條件。在FACP的信號和控制點的正確活動上，驗證是否收到并處理。
1.系統裝備有可選擇特點時，制造商的手冊應該可以查詢并確定適當?shù)臏y(cè)試程序。意圖傳輸這樣的信號證實控制執行的個體地址、組團地址、敏感性監控，功能性驗證和類似事宜。
5.竣工檢查：
在竣工檢查中，工廠主要設備的制造商訓練檢查證明功能各方面完好。
6. 指導
a.要求提供操作系統指導。指導全部系統部件和整個系統的操作，包括程序變更和提供的功能。
b.承包商和/或系統制造商的代表為業主提供一份打印的"操作順序"。
為火災警報面板提供地址輸出命令點：
1. 在火災條件下，煙霧管理的機動化窗口的開啟和關閉。
2. 煙霧管理的風扇控制。
3.機動化的全部防火擋板。
4.連接火災控制面板的火災出口門開啟裝置。
5.升降機。
火災面板地址輸入點火要求如下監督內容；
1. 在火災條件下，煙霧管理的機動化窗口打開或者關閉的打開位置和合閘位置
2. 煙霧管理的風扇狀態。
3. 機動化的全部防火擋板的打開位置和合閘位置 (每塊擋板2個輸入點)。
4.水流指示流出閥門的開關。
5.通過填塞物開關操作火災區域閥門的合閘位置。
6. 通過填塞物開關操作消防泵的合閘位置的隔離閥門。
火災警報系統能將選擇的警報SMS 消息送到移動電話。BMS 能將SNMP 策略發給HP打開查看軟件或者電子郵件消息。
為3 個人員提供訓練、編程、委托、操作、測試以及系統的故障診斷。訓練結束時，參加人從制造商獲得到一份操作、編程和系統的維修的證明書。
提供4 套印刷本手冊和下列的軟拷一份：
1.全部系統圖形；表明設備的標簽數目和每個控制點
2.全部控制邏輯；表明設備的標簽數目和每個控制名稱和地址
3.用于試運行全部控制點參數和數值的目錄。
4.提供軟件的操作者手冊。
5.操作和維護手冊。
SECTION-24 TELEPHONE SYSTKM
The Contractor shall supply, install, test and commission a telephone system, including but not limited to telephone cabinets, telephone distribution frame, conduits and wiring, all as shown on the Drawings in strict compliance with requirements and specifications of local authority , and as herein specified.
Only a telephone terminal cabinet (TTC) will be provided for the each retail area where the distribution in these areas will be according to the tenant requirements.
Hypermarket mall should have separate telephone system with ils own PABX.
Description of Work
Complete telephone distribution network and private telephone exchange system including, but not limited to the following:
Telephone distribution installations
Data/voice communication Electronic private automatic branch exchange (EPABX)
Main distribution frame (MDF)
EPABX peripheral equipment
Operator's console
Power supply equipment
Telephone outlets
Ancillary equipment
Regulations and Standards
Telephone installations are to comply with the requirements of local telephone authority and the relevant CCITT recommendations.
Approved Manufacturers
Manufacturers to be proposed by Tenderer as part of his Tender, in all cases fo be approved by
Telephone System Cables
Two-pair and multi-pair cables for indoor cabling are fo be polyethylene insulated, tinned solid copper conductors, twisted into pairs, color coded, with wrapping of aluminum polyester tape and grey PVC sheath. Minimum diameter of conductor is to be 0.6mm. Drain wire is to be provided in each cable, 0.4mm diameter for I to 10-pair cables and 0.6mm diameter for cables with more than 10-pairs.
Multipair cables for installation in conduits within technical services arc to be n on-hygroscopic, waterproof, polyethylene insulated, tinned solid copper conductors, minimum 0,6mm diameter,
fwisled into pairs, color coded, with wrapping of alumini/.ed polycsicr tape, PVC tape, aluminum or copper sheath and PVC over-sheath.
Cables arc to be raled for maximum operating voltage of 150V, with insulation resistance of ] 0,000 megaohm/km, and tested at 500V d.c applied core-core and core-earth.
EPABX is to be fully electronic, digital stored program, microprocessor controlled with LSI switching circuits. liPABX is to be designed for use as a universal telephone exchange system for all applications. Jt is to be possible to connect any combinaiion of DTMF and rolary dial telephones to the EPABX, with the provision of manufacturer-made interface modules as necessary within the EPABX and without the EPABX and without the need to modify the
CAPACITY is to be as follows:
external trunk lines : as shown on the Drawings
internal extensions : as shown on the Drawings
operator's consoles : one
power supplies:
primary power : 220V (+/-15%)
a.c. single phase, 50 Hz
battery :
relative humidity :
compatible station : two-wire and/or three wire standard
serial pulse or DTMF dialing
The exchange should be equipped with all Standard facilities for voice and
communication. The following features should be at least available in the EPABX.
1) Station to station calling
2) Direct outward dialing
3) Direct inward dialing
4) Executive override
5) Camp on busy
6) Enquiry call
7) Call transfer
8) Dial access to operator
9) Recall dial tone
Sana's Cily Mall
Line lockout with warning
Splitting.
Serial call
13) Power failure transfer
14) Call back queuing for trunks
15) Direct distance dialing with provisions for:
With provision for at least the following:
1) Data link
2) Mulli media integration
3) ISDN compatibility
4) Voice mail
5) GSM
6) On site paging system
B. Telephone extensions should be grouped in three categories regarding their
accessibility to trunk lines.
i. Non-restricted (normal), i.e. internal calls
ii. Semi-restricted (through user) i.e. external calls
ii. Restricted, {through operator) i.e. Data calls
C. The capacity should be provided for station numbers to be assigned to lines at the
time of installation in accordance with a customer desired numbering plan and to
permit reassignment while in service to permit personnel moves without requiring
number changes. The numbering system should utilize a numbering plan which
should be changeable without hardware or wiring alterations.
Operator's Console Features
The operator's console should have at least the following features:
1. Facility lo check status of any individual trunk or extension line.
2. Ring-when-free facility for external calls transferred to a given busy extension.
3. Automatic return to operator if an extension docs not answer on outside call within 30
seconds.
4. Call number display.
6. Priority and access into an established communication call via a special tone to both
conversing parties.
7. Splitting.
8. Call hold.
9. Abbreviated dialing.
10. Automatic call supervision.
11. Fault indication
12. Automatic and manual switch-over to night service.
Power Supply
Power supply consists a regulated 48 V direct feeding unit, with a charging attachment for trickle charging with uninterrupted change over to battery operation, and automatic return upon restoration of the AC power supply.
Batteries should be scaled lead acid type deep cycle with sufficient capacity for the 3 hours emergency operation during periods of peak traffic.
for Contracting &
The output voltage of the charging rectifier should remain within reasonable limits and be independent (7% from no load to full load).
Telephone Distribution Network
1. Genera!
Trie telephone installation distribution network should be completely separate from other systems wiring.
2. Telephon^Wiring
Multi-pair cables for indoor installation should be composed of insulated wires twisted to pairs, with a wrapping of insulating foil, aluminum foil and P.V.C. sheath of grey color. Diameter of conductors to be 0.6mm.
Single pair cables for wiring to outlets should be P.V.C. insulated and P.V.C. sheathed.
Multi-pair telephone cable for outdoor installation should be polythene sheathed conductors steel wire armored and polythene sheath overall.
Underground cables should be filled with petroleum jelly to prevent ingress of moisture.
Multi-pair (elcphone cables 1 lo 10-pairs should include an additional earth wire 0.4m. Above 10 pairs, cables should include 0.6mm earth wire.
3. Main Distribution Framc_XMDfi)
Size is to be as shown on the drawings.
Protection against over-voltage on all trunk circuits is to be provided by gas-discharge tube protectors and as shown on the Drawings.
Terminals are to be identified by numbered tags corresponding to respective lines and extensions; Proposed numbering scheme is to be submitted for approval. Wiring of internal and external lines is lo be implemented by double frame MDF and jumpering between feeder and distribution side.
4. Telephone Terminal Cabinets
Telephone terminal cabinets should have a general purpose type sheet metal or PVC enclosure for surface or (lush mounting as indicated on the drawings with plug-in or punch-down terminal modules.
Cabinets should house the necessary terminal blocks for terminating and lapping cables.
Ail telephone cabinets should have an identifying name plate of laminated opaque plastic engraved with white letters on a black background.
5. Telephone Outlets
Outlet should be RJ45 flush type consisting of a black rigid P.V.C conneclor block with 4
Face oullel should be socket plug of the same material of other electrical devices in the areas where telephone outlets arc located.
Complete literature and applicable catalogue number for all components. Detailed listing of all operational facilities both specified and possible as optional. Grounding
Section ( 5 ) Part ;
SECT1ON-25 FIRE ALARM AND DETECTION SYSTEM
The fire alarm and detection system shall be of the analogic ii<A!-es>dhlc type with control panel incorporating day and night sensitivity. The system shall be of the presignal four wire closed loop supervised.
Cables shall be 1.5mm2 twisted shielded pair with four colors. The system shall incorporate photoelectric smoke detectors, fixed and rate of rise detectors, manual pull stations and alarm bells. Interlock with AHU's and fans shall be provided and signals to fire pumps.
Areas incorporating FM 200 and C02 fire fighting equipment shall have their signals from detectors on different zones to prevent false alarm. Every detector will have an address and number with self-adjustment with panel and self-status.
The system shall have the capacity for Fire Fighters Phone, Area-of-Rescuc communication and also have the capacity for Fan & Damper control with monitored feedback.
ill cases to be approved by
1. This section of the specification includes the furnishing, installation and connection of the
microprocessor controlled, intelligent reporting fire alarm equipment required to form a
complete coordinated system ready for operation. It shall include, but not be limited to,
alarm initiating devices, alarm notification appliances, control panel, auxiliary control
devices, annunciators, and wiring as shown on the drawings and specified herein.
2. The fire alarm system shall comply with (he requirements of NFPA Standard No. 72 for
protected premises signaling system except as modified and supplemented by this
specification, where the more stringent requirement shall be implemented. The system
shall be electrically supervised and monitor the integrity of all conductors.
3. The fire alarm manufacturer shall be of the highest caliber and insist on the highest
quality.
4. The FACP and peripheral devices shall be manufactured 100% by a single manufacturer
(or division thereof).
Scope
1. A new intelligent reporting, microprocessor controlled fire detection system shall be
installed in accordance with the specification and drawings.
2. Basic Performance:
a. Alarm, trouble and supervisory signals form all intelligent reporting devices shall
be encoded onto an NFPA Style 7 {Class A) signaling line circuit.
b. Initiation Device Circuits (IDC) shall be wired Class B (NFPA Style B).
c. Notification Appliance Circuits (NAC) shall be wired Class B (NFPA Style Y).
d. Digitized electronic signals shall employ check digits or multiple polling.
e. A single ground or open on the system Signaling Line Circuit shall not cause
system mal function, loss of operating power or the ability to report an alarm.
f. Alarm signals arriving at the main FACP shall not be lost following a power failure
(or outage) until the alarm signal is processed and recorded.
ion ( 5 ) Part 3 cat Spccillcalion
c System Functional Operation
:n a fire alarm condition is delected and reported by one of the system initialing
ccs, the following functions shall immediately occur.
i. The System Alarm LED shall flash.
). A local piezo electric signal in the control panel shall sound.
;. A backlit 80 character LCD display shall indicate all information associated
with the Fire Alarm condition, including the type of alarm point and its location
within the protected premises. ]. Printing and history storage equipment shall log the information associated with
each new fire alarm control panel condition, along with time and date of
;. All system output programs assigned via control by event equations to be activated by the particular point in alarm shall be executed, and the associated System Outputs (alarm Notification appliances and/or relays) shall be activated.
Three copies of all submitlals shall be submitted to the Architect/Rngineer for review including but not limited to the following manufacturers: Edwards, Pyrotronics, and Simplex.
b. All reference to manufacturer's model numbers and other pertinent information
quality. Kquivalcnt equipment from other manufacturers may be substituted for the specified equipment as long as the minimum standards arc met.
c. r'or equipment other than that specified, the contractor shall supply proof that such
substitute equipment equals or exceed the features, functions, performance, and
quality of the specified equipment.
Shop Drawings
a. Sufficient information, clearly presented, shall be included to determine compliance
with drawings and specifications.
b. Include manufacturer's name(s), model numbers, ratings, power requirements,
equipment layout, device arrangement, complete wiring point-to-point diagrams,
and conduit layouts.
c. Show annunciator layout, configurations, and terminations.
Manuals
a. Submit simultaneously with the shop drawings, complete operating and
maintenance manual listing the manufacturer's name(s) including technical data
sheets.
b. Wiring diagrams shall indicate internal wiring for each item of equipment and the
interconnections between the items of equipment.
c. Provide a clear and concise description of operation that gives, in detail, the
information required to properly operating the equipment and system.
Software Modifications.
a. Provide the services of a factory trained and authorized technician to perform all ;ccliir-;iin to the site shall not exceed 4 hours.
m ( 5 ) Part 3
b. Provide all hardware, software, programming tools and documentation ncccssai \ to modify the (ire alarm system on site. Modification includes addition and deletion of devices, circuits, -tones and changes to system operation and custom cable changes for devices or /ones. The system structure and software shall place no limit on the type or extent of software modifications on-sitc. Modification of software shall not require power-down of the system or loss of system fire protection while modifications arc being made.
5. Certifications
Together with the shop drawings submittal, submit a certification from the major equipment manufacturer indicating that the proposed supervisor of installation and the proposed performer of contract maintenance is an authorized representative of the major equipment manufacturer. Include names and addresses in the certification.
E. Guaranty
All work performed and all material and equipment furnished under this contract shall be free from defects and shall remain so for a period of at least one (I) year from the dale of acceptance. The full cost of maintenance, labor and materials required to correct a defect during this one year period shall be included in the submittal bid.
P. Applicable Standards and Specifications
The specifications and standards listed below form a parl of this specification. The system shall fully comply with the latest issue of these standards.
a. National Fire Protection Association (NFPA) - USA:
b. Underwriters Laboratories Inc. (UL) - USA:
c. All requirements of the Authority Having Jurisdiction (AID).
G. Products
1. Eguiprnent_and Material, General:
a. All equipment and components shall be new, and the manufacturer's current model.
The materials, appliances, equipment and devices shall be tested and listed by a
nationally recognized approvals agency for use as part of a protective signaling
system, meeting the National Fire Alarm Code.
b. All equipment and components shall be installed in strict compliance wilh
manufacturers' recommendations. Consult the manufacturer's installation manual
for all wiring diagrams, schematics, physical equipment sb.es, etc., before
beginning system installation.
c. All equipment shall be attached to walls and ceiling/floor assemblies and shall be
held firmly in place (e.g., detectors shall not be supported solely by suspended
ceilings). Fasteners and supports shall be adequate to support the required load.
2. Conduit and Wire
a. Conduit
i. Conduit where exposed shall he heavy gauge galvanized steel conduit and shall
be in accordance with the National Electrical Code (NBC) , local and slate
requirements, ii. Where possible, all wiring shall be installed in conduit or raceway. Conduit fill
shall not exceed 40 percent of interior cross sectional area where three or more
cables arc contained within a single conduit. iii. Cable must be separated from any open conductors of power, or Class 1
circuits, and shall not be placed in any conduit, junction box or raceway
containing these conductors.
Wiring for 24 volt control, alarm notification, emergency communication and similar power-limited auxiliary functions may be run in the same conduits as initiating and signaling line circuits. All circuits shall be provided with transient suppression devices and the system shall be designed to permit simultaneous operation of all circuits without interference or loss or signals. Conduits shall not enter the Fire Alarm Control Panel, or any other remotely mounted Control Panel equipment or backboxes, except where conduit entry is specified by the FACP manufacturer.
i. All fire alarm system wiring shall he new.
ii. Wiring shall be in accordance with local, state and national codes and as
recommended by the manufacturer of tlic fire alarm system. Number and size
of conductors shall be as recommended by the fire alarm system manufacturer
and in general 1.5 mm2. iii. All wire and cable shall be listed and/or approved by a recognized testing
agency for use with a protective signaling system. iv. Wire and cable not installed in conduit shall have a fire resistance rating
suitable for the installation as indicated in NFPA 70 (e.g. FPLR) or (FP - 200). v. All field wiring shall be completely supervised.
Initiating circuits shall be arranged to serve like categories (manual, smoke, water flow) Mixed category circuitry shall not be pt,Tmitted except on signaling line circuits connected to intelligent reporting devices.
The Fire Alarm Control Panel shall be connected to a separate dedicated branch circuit, maximum 20 amps. This circuit shall be labeled at the Main Power Distribution Panel as FIRE ALARM. Fire Alarm Control Panel Primary Power wiring shall be 4rnm2. The Control Panel Cabinet shall be grounded securely to a grounding rod.
Main_Fire_AlarrnControl Panel
The FACP shall contain a microprocessor based Central Processing Unit (CPU). The CPU shall communicate with and control the following types of equipment used to make up the system: intelligent detectors, addressable modules, printer, annunciator, and other system controlled devices.
System General Operation
The Fire Alarm Control Panel shall include a full featured operator interface control and annunciation panel that shall include a backlit Liquid Crystal Display, individual, color coded system status LBDs, and an alphanumeric keypad for the field programming and control of the fire alarm system.
All programming or editing of the existing program in the system shall be achieved without special equipment and without interrupting the alarm monitoring functions of the Fire Alarm Control panel.
The FACP shall provide the following features:
Drift Compensation to extend detector accuracy over life. Sensitivity Test, meeting requirements of NFPA 72, Chapter 5.
Maintenance Alert to warn of excessive smoke detector dirt or dust
accumulation.
System Status Reports 10 display on printer.
Alarm Verification, with verification counters.
PAS presignal, meeting NFPA 72 3-8.3 requirements.
Rapid manual station reporting (under 2 seconds).
Non-Alarm points for general (non-fire) control.
Periodic Detector Test, conducted automatically by software,
Pre-alarm for advanced fire warning.
Cross Zoning with the capability of: counting two detectors in alarm, two
March time and temporal coding options. Walk Test, with check for two detectors set to same address. Control-By-Time for non-fire operations, with holiday schedules. Day/Night automatic adjustment of detector sensitivity. Device Blink Control for sleeping areas.
jntral Microprocessor
The Microprocessor unit shall communicate with, monitor, and control all external interfaces with the control panel. It shall include EPROM for system program storage; non-volatile memory for building-specific program storage; and "watch dog" timer circuit to defect and report microprocessor failure. The Microprocessor Unit shall contain and execute all control-by-event programs specific aclion to be taken if an alarm condition is detected by the system. Such control -by-event programs shall be held in non-volatile programmable memory, and shall nof be lost even if system primary and secondary power failure occurs. The Microprocessor unit shall also provide a real-time clock for time annotation of system displays, printer, and history file. The time-of-day and dale shall not be lost if system primary and secondary power supplies fail. The real time clock may also be used to control non-fire functions al programmed time-of-day, day-of-wcck, and day-of-ycar. Display
The display shall provide all the controls and indicators used by the system operator and may be used to program all system operational parameters.
The display shall include status information and custom alphanumeric labels for all intelligent detectors, addressable modules, and software zones.
The Display shall provide an 80-charactcr back-lit alphanumeric liquid Crystal Display (LCD). It shall also provide 5 Lighl-Hmitting-Diodes (LED's) that will indicate the status of the following system parameters: AC POWER, SYSTEM ALARM, SYSTEM TROUBLE, SIGNAL SILENCED, SUPERVISORY, and PRE-ALARM.
The Display shall provide key touch key-pad with control capability to command all system functions, entry of any alphabetic or numeric information, and field programming, two different password level shall be provided to prevent unauthorised system control or programming.
The Display shall include the following operator functions: SIGNAL SILENCE, RESHT, DRILL, and ACKNOWLEDGE
Signaling Line Circuit (SLC)
i. The SLC Interface shall provide power to and communicate with intelligent detectors (ionizalion. Photoelectric, or Thermal) and intelligent modules (monitor or control).This shall be accomplished over a single SLC loop.
11. The Loop Interface Board shall receive analog information from all intelligent defectors (hat shall be processed lo determine whether normal, alarm, or trouble conditions cxisl for each detector. The software shall automatically maintain the detector's desired sensitivity level by adjusting for the effects of environmental factors, including the accumulation of dust in each detector. The analog information shall also be used for automatic detector testing and for the automatic determination of detector maintenance requirements.
iii. The detector software shall meet NJ-TA 72, chapter 7 requirements.
iv. The detector software shall allow manual or automatic sensitivity adjustment.
f. Serial Interfaces
i. An interface between the Fire Alarm Control Panel and Electronic Data Processing (EDP) peripherals shall be provided.
ii. The interface shall allow the use of printers, CRT monitors, and PC compatible computers.
in. The interface shall include special protocol methods that allow off-site monitoring of the FACP over standard dial-up phone lines. This ancillary capability shall allow remote readout of all status information, including analog values, and shall not interfere with or degrade FACP operations when used. H shall allow remote FACP Acknowledge, Reset, or Signal Silence in this mode. It shall also allow adjustment of detector sensitivity and readout of the history file.
iv. The port for the serial connection of the optional Annunciators and remote LCD displays shall be provided.
v. The interface may be usexl for network connection to a Proprietary
Receiving Unit.
The control panel shall be housed in a cabinet suitable for surface or semi-flush
mounting. Cabinet and front shall be corrosion protected, given a rust-resistant
prime coat, and manufacturer's standard finish.
The door shall provide a key lock and shall include a glass or other transparent
opening for viewing of all indicators.
All interfaces and associafcd equipment are to be protected so that they will not be
affected by voltage surges or line transients consistent with standards.
Optional plug-in modules shall be provided for NFPA 72, chapter 4 transmitters as
well as a Digital Alarm Communicator Transmitter.
An optional module shall provide 8 Form-C relays rated at 5.0 the relays shall track
Power Supply
The power supply shall operate on 220 VAC, 50Hz, and shall provide all necessary
power for the FACP.
It shall provide sufficient current of usable Notification appliance power, using a
switching 24 VDC regulator.
It shall provide a battery charger for 24 hours or standby using dual-rate charging
techniques for fast battery recharge.
ll shall provide a very low frequency sweep earth detect circuit, capable of
detecting earth faults on sensitive addressable modules.
Section ( 5 ) Part 3
Temperature Coefficient (PTC) resistors. ate battery voltage and charging current,
v. It shall be power-limited using Positivi vi. It shall provide optional meters to indi'
Field Wiring Terminal Blocks
inal blocks shall be a removable, plug-in type used. Terminal blocks which are permanently
For ease of service all panel I/O wiring terrr
arid have sufficient capacity for tf
fixed are not acceptable.
Operators Controls
i. Acknowledge Switch:
a. Activation of the control panel Acknowledge s
and/or troubles shall silence the local panel piczo electric signal and change the alarm and Trouble LHDs from flashing mode to steady-On mode. If multiple alarm or trouble condition exists, depression of this switch shall advance the 80-character LCD display to the next Alarm or Trouble condition.
b. Depression of (he Acknowledge switch shall also silence all remote annunciator
pic/o sounders.
ii. Signal Silence Switch: Activation of the Signal silence switch shall cause all programmed alarm notification appliances and relays to return to the normal condition after an alarm condition. The selection of notification circuits and relays that are silenceable by this switch shall be fully field programmable within the confines of all applicable standards. The FACP software shall include silence inhibit and auto-silence timers.
iii. System Reset Switch: Activation of the system reset switch shall cause all electronically-latched initiating devices, appliances or software 7Oncs, as well as all associated output devices and circuits, to return to their normal condition.
Holding the system RESET switch shall perform a lamp test function.
Drill (Evacuate) Switch.
The Drill switch shall activate all notificatio
shall latch until the panel is silenced or reset.
:uits. The drill functic
Printer
The Printer shall provide hard-copy printout of all changes in sfatus of the system and shall time-stamp such printouts with the current time-of-day and date. The printer shall be standard carriage with 80-characters per line and shall use standard pin-feed paper. The printer shall be enclosed in a separate cabinet suitable for placement on a desktop or table. The printer shall communicate with the control panel using an interface complying with Flcctrical Industries Association standards.
Field Progra
ing
The system shall be programmable, configurable and expandable in the field
without the need for special tools or electronic equipment and shall not require field
replacement of electronic integrated circuits.
All programming may be accomplished through the standard FACP keypad.
All field defined programs shall be stored in non-volatile memory.
The programming function shall be enabled with a password that may be defined
specifically for the system when it is installed. Two levels of password protection
shall be provided in addition to a key-lock cabinet. One level is used for status level
changes such as zone disable or manual on/off commands. A second (higher-level) is used for actual change of program information.
v. Program edit shall not interfere with normal operation and fire protection. If a fire condition is dcteclcd during programming operation, the system shall exit
vi. A special program check function shall be provided to detect common operator
errors. vii. An Auto-Program (seif-lcarn) function shall be provided to quickly install initial
functions and make the system operational. \nii. For Flexibility, an on off-line programming function, with batch upload/download,
shall also be available.
Specific System Operations.
i. Smoke Detector Sensitivity Adjust: Means shall be provided for adjusting the sensitivity of any or all analog intelligent smoke detectors in the system from the system keypad.
ii. Alarm Verification: Each of the intelligent addressable smoke detectors in the system may be independently selected and enabled to be an alarm verified detector. The Alarm Verification delay shall be programmable from 5 to 30 seconds and each detector shall be able to be selected for verification. The FACP shall keep a count of the number of times that each detector has entered the verification cycle. 'These counters may be displayed and reset by the proper operator commands.
iii. Point Disable: Any Devices in the system may be Enabled or Disabled through the system keypad.
iv. Point Read: The system shall be able to display or print the following point status diagnostic functions.
a. Device status
b. Device type
c. Custom device label
d View analog detector values
f. All Program Parameters
v. System Status Reports: Upon command from an operator of the system, a status report will be generated and printed, listing all system status.
vi. System History Recording and Reporting: The Fire Alarm Control Panel shall contain a History Buffer that will be capable of storing up to 650 system alarm/troubles/operator actions. Each of these activations will be stored and time and dale stamped with the actual lime of the activation. The contents of the History Buffer may be manually reviewed, one event at a lime, or printed in its entirety. Although the foreground history buffer may be cleared for user convenience, a background, non-erasable buffer shall be maintained which provided the last 650 system events.
The History Buffer shall use non-volatile memory. Systems that use volatile memory for history storage are no( acceptable.
vii. Automatic Detector Maintenance Alert: The Fire Alarm Control Panel shall automatically interrogate each intelligent smoke detector and shall analyxe the detector responses over a period of time.
If any intelligent smoke detector in the system responds with a reading that is below or above normal limits, then the system will enter Ihc Trouble Mode, and the particular detector will be annunciated on the system display, and printed on the optional printer. This feature shall in no way inhibit the receipt of alarm conditions
ion ( 5 ) Part 3 cal Specification
in the system, nor shall it require any special hardware, special tools or computer expertise to perform.
viii. Pre-alarm function: The system shall provide two levels of pre-alarm warning to give advance notice of a possible fire situation. Both pre-alarm levels shall be fully field adjustable. Tne first level shall give an audible indication at the panel. The second level shall give an audible indication and may also activate control relays. The system shall also have the ability to activate local detector sounder bases at the
ix. Software Zones: The FACP shall provide sufficient software zones. All addressable devices may be field programmed to be grouped into these zones for control activation and annunciation purposes.
System Components
Programmable Electronic Sounders.
i. Electronic sounders shall operate on 24 V dc nominal.
ii. Electronic Sounders shall be field programmable without the use of special tools, to
provide slow whoop, continuous or interrupted tones with an output sound level of
at least 90 dBA measured at 3m from the device, iii. Shall be flush or surface mounted as shown on plans.
Strobe Lights with Every Sounder
i. Shall operate on 24 V dc nominal.
ii. Shall meet Ihe requirements of the ADA and shall meet the following criteria:
- The maximum pulse duration shall be2/10ths of one second.
- The strobe intensity shall meet the requirement of UL 1971.
- The flash rate shall meet the requirements of UL 1971.
- The appliance shall be placed 2m above the highest floor level within the space,
or 15cm below the ceiline, whichever is the lower.
for
Addressable Devices - General
i. Addressable Devices shall provide an address-setting means using rotary decimal switches.
ii. Addressable Devices shall use simple to install and maintain decade (numbered 1 to 10) type address switches. Devices which use a binary address setting method, such as a dip switch, are difficult to install and subject to installation error. This type of device is not an allowable substitute.
in. Detectors shall be Intelligent and Addressable, and shal! connect with two wires to the Fire Alarm Control Panel Signaling Line Circuits.
iv. Addressable smoke and thermal detectors shall provide dual alarm and power LEDs shall flash under normal conditions, indicating that the detector is operational and in regular communication with the control panel, and both LEDs shall be placed into steady illumination by the control panel, indicating that an alarm condition has been detected. If required, the flashing mode operation of the detector LBDs shall be optional through the system field program. An output connection shall also be provided in the base to connect an external remote alarm LED.
v. Smoke detector sensitivity shall be set through the Fire Alarm Control Panel and shall be adjustable in the field through the field programming of the system. Sensitivity may be automatically adjusted by the panel on a timc-of-day basis.
vi. Using software in the FACP, detcciors shall automatically compensate for dust accumulation and other slow environmental changes that may affect their performance. The detectors shall meet the calibrated sensitivity test requirements of NFPA 72 Chapter 7.
vii. The detectors shall be ceiling-mounted and shall include a separate twist-lock base with tamper proof features. An optional base shall be available with a built-in (local) sounder rated ai 85 dBA minimum.
Viii The detectors shall provide a test means whereby they will simulate an alarm condition and report that condition to the control panel. Such a test may be initiated at the detector itself (by activating a magnetic switch) or initialed remotely
ix. Detectors shall also store an internal identifying type code that the control panel shall use to identify the type of device (ION, PHOTO, THERMAL).
Addressable Pull Box (manual station)
i. Addressable Pull Boxes shall, on command from the Control Panel, send data to the
panel representing the state of the manual switch. They shall use a key operated
test-reset lock, and shall be designed so that after actual emergency operation, they
cannot be restored to normal use except by the use of a key. ii. All operated stations shall have a positive, visual indication of operation and utili/e
a key type reset. iii. Manual Stations shall be constructed of Lcxan with clearly visible operating
instructions provided on the cover. The word FIRE shall appear on the front of the
stations in raised letters, 45mm or larger. iv. Stations shall be suitable for surface mounting or semi-flush mounting as shown on
the plans, and shall be installed not less that 1m, nor more than 1.4m above the
finished floor, f. Intelligent Photoelectric Smoke Detector - High Performance Type (HPO)
The detectors shall use the photoelectric (light-scattering) principal to measure smoke density and shall on command from the control panel, send data to the panel representing the analog level of smoke density. When there is a rapid rate of rise in temperature, (he sensitivity is increased to respond to very small smoke particles.
Intelligent Thermal Detectors
i. Thermal Detectors shall be intelligent addressable devices rated at 58°C and have
rate-of-rise clement rated al 9.4°C per minute. It shall connect via two wires to the
Fire Alarm Control Panel Signaling line circuit. Up to 99 intelligent heat detectors
may connect to one S1,C loop, ii. The detectors shall use an electronic sensor to measure thermal conditions caused
by a fire and shall, on command from the control panel, send data to the panel
representing the analog level of such thermal measurements, iii. An optional intelligent heat detector shall be available for applications which do not
require a rate-or-rise clement.
Intelligent Duct Smoke Detector
i. Duct Smoke Detector Housings shall accommodate either an intelligent ionization
sensor or an intelligent photoelectric sensor, that provides continuous analog
monitoring and alarm verification from the panel, ij. When sufficient smoke is sensed, an alarm signal is initiated at the FACP, and
appropriate action taken lo change over air handling systems to help prevent the
Section ( 5 ) Part 3
rapid distribution of toxic smoke and fire gases throughout the areas served by the duel system.
Addressable Dry Contact Monitor Module
i. Addressable Monitor Module shall be provided to connect one supervised 1EC ?onc of conventional Alarm Initiating Devices (any N.O. dry contact device) to one of the Fire Alarm Control Panel Signaling Line Circuit (SLC) Loops.
n. The Monitor Module shall be mounted in a 10cm square, 54mm deep electrical box.
lii. The IDC zone may be wired for Style D or Style B operation. A LED shall be provided that shall flash under normal conditions, indicating that the Monitor Module is operational and in regular communication with the control panel.
Two Wire Detector Monitor Module
i. Addressable Monitor module shall be provided to connect one supervised IDC zone
of conventional 2-Wire smoke detectors or alarm initiating devices (any N.O. dry
contact device), ii. The Two-Wire Monitor Module shall be mounted in a 10cm square, 54mm deep
electrical box or in an optional surface backbox. lii. The IDC zone may be wired for Class A or U (Style D or Style B) operation. A
LED shall be provided that shall flash under normal conditions, indicating that the
Monitor module is operational and in regular communication with control panel.
Addressable Control Module
i. Addressable Control Modules shall be provided to supervise and control the operation of one conventional Notification Appliance Circuit (NAC) of compatibles 24 V dc powered, polarized Audio/Visual Notification Appliances. For fan shutdown and other auxiliary control functions, the control module may be set to operate as a dry contact relay.
ii. The Control Module shall be mounted in a standard 6cm square, 54mm deep electrical box, or in a surface mounted backbox.
iii. The Control module NAC circuit may be wired for Style Z or Style Y (Class A/B) with up to 1 amp of inductive A/V signal, or 2 Amps of resistive A/V signal operation, or as dry contact ( form C ) relay. The relay coil shall be magnetically latched to reduce wiring connecting requirements, and to insure that 100% of all auxiliary relay or NACs may be energized at the same time on the same pair of wires.
iv. Audio/visual power shall be provided by a separate supervised power loop from the main fire alarm control panel or from a supervised remote power supply.
v. The control module shall provide ad dress-setting means using decimal switches and shall also store an internal identifying code that the control panel shall use to identify the type of device. A LED shall be provided that shall flash under normal conditions, indicating that the control module is operational and is in regular communication with the control panel.
vi. A magnetic test switch shall be provided to lest the module without opening or shorting its NAC wiring.
vii. The Control module shall be suitable for pilot duly applications and rated for a minimum of 6 amps at 30 V dc.
Isolator Module
i. Isolator Module shall be provided lo automatically isolate wire-to-wirc short circuits on an SLC loop. The Isolator Module shall limit the number of modules or detectors that may be rendered inoperative by a short circuit fault on the SI ,C Loop.
Line Investment
At least one isolator module shall be provided for each floor or protected /one of
the building. ii. If a wirc-to-wire short occurs, the Isolator module shall automatically open-circuit
(disconnect) the SLC loop. When the short circuit condition is corrected, the
Isolator Module shall automatically reconnect the isolated section, hi. The Isolator Module shall not require any address -selling, and its operation shall be
lolally automatic. It shall not be necessary to replace or reset an Isolator Module
iv. The Isolator Module shall be mounted in a standard lOOrnm deep electrical box or in a surface mounted backbox. It shall provide a single LED that shall flash to indicate that the Isolator is operational and shall illuminate steadily to indicate lhal a short circuit condition has been detected and isolated.
Water Flow Switches
i. Flow swilches shall be integral, mechanical, non-coded, n on-accumulative retard
type, ii. Flow switches shall have an alarm transmission delay time that is conveniently
adjustable from 0 to 60 seconds. Initial settings shall be 30; 45 seconds. iii. Flow switches shall be located, a minimum of 300mm from a fitting that changes the
direction of the flow and a minimum of 900mm from a valve.
Sprinkler and Standpipc Valve Supervisory Swilches
i. Each sprinkler syslem water supply control valve riser or zone control valve, and
each standpipe system riser control valve shall be equipped with a supervisory
switch. Standpipc hose valves, and test and (train valves shall not be equipped with
supervisory switches, ii. Each Post Indicator Valve (PIV) or main gate valve shall be equipped with a
supervisory switch, iii. Mounl swiich so as not to interfere with the normal operalion of the valve and
adjusl to operate within two revolutions toward the closed posilion of the valve
control, or when the s!em has moved no more than one-fifth of the distance from its
normal posilion. iv. The mechanism shall be conlained in a weatherproof aluminum housing that shall
provide a 19mm lapped conduit entrance and incorporate the necessary facilities for
attachment lo the valves.
v. Swiich housing lo be finished in red baked enamel, vi. The entire installed assembly shall be tamper proof and arranged lo cause a swiich
opcralion if the housing cover is removed, or if the unit is removed from its
mounting, vii. Valve supervisory switches shall be provided and connecled under this section and
installed by mechanical contractor,
l-"an shut Down Facilities.
Relays for shutting down fans and air handling units shall be provided.
Door Release Units and Fire Curtains
Door release units shall be electrically operaled and magnetically hold smoke doors in an
open position
Operation of the fire alarm system shall release doors and give signal to operalc fire
s. Serially Connected Annunciator Requirements,
i. The Annunciator shall communicate with the fire alarm control panel via
communications loop and shall annunciate all zones in the system. Up to 10
annunciators may be connected to the communications loop. ii. The annunciator shall need only four wires to connect to the FACP. iii. The annunciator shall provide a red Alarm l.RD per zone, and a yellow Trouble
LED per zone. The annunciator will also have an "ON-LINE" LED local piczo
sounder, local acknowledge/lamp test switch, and custom /.one/function
identification labels. iv. The annunciator switches may be used for System control such as. Global
Acknowledge, Global Signal Silence and Global System Reset.
t. LCD Alphanumeric Display Annunciator:
i. The Alphanumeric display annunciator shall be a supervised, remotely located back-lit LCD display containing a minimum of eighty (80) characters for alarm annunciation in clear English text.
ii. The LCD annunciator shall display all alarm and trouble conditions in the system.
iii. The annunciator shall connect to a two-wire interface. The two-wire connection shall be capable of distances of 1800mm. The signal may be increased in 900mm increments with an optional repeater. An optional module shall be available which allows the E1A-485 signal to be transmitted over Fiber Optics.
iv. The system shall allow a minimum of four LCD annunciators. Each LCD shall be capable of the following system function: Acknowledge, Signal Silence and Reset.
5. Batteries
a. Shall be 12 volt, Gel-Cell type (two required).
b. Battery shall have sufficient capacity to power the fire alarm system for not less
than twenty-four hours plus 5 minutes of alarm upon a normal AC power failure.
c. The batteries arc to be completely maintenance free. No Liquids are required.
There shall be no fluid level checks, refills, spills and leakage.
6. Fire Phone
When a Fire Phone Handset is plugged into a Fire Phone Jack, the LED on the Zone Control panel associated with that Fire Phone /.one will start flashing, A ringing signal will be heard to indicate that a handset has been jacked in. The ringing signal will cease when a Fire Phone Zone is selected.
Normally, only one Fire Phone Zone is selected at a time. Selecting another zone where a handset is jacked in will deselect the other zone(s). Where more than one /one is to be selected at a time, Party Line mode must be selected
Execution
1. Installation shall be in accordance with the NEC, NFPA 72, local and state codes, and
shown on the drawings, and as recommended by the major equipment manufacturer.
2. All conduit, junction boxes, conduit supports and hangers shall be concealed in finished
areas and may be exposed in unfinished areas. Smoke detectors shall not be installed
prior to the system programming and test period. If construction is ongoing during this
period, measures shall be taken to protect smoke detectors from contamination and
physical damage.
3. All fire detection and alarm system devices, control panels and remote annunciators shall
be flush mounted when located in finished areas and may be surface mounted when
located in unfinished areas.
Test
Provide the service of a competent, factory-trained engineer or technician authorized by the manufacturer of the fire alarm equipment to technically supervise and participate during all of the adjustments and test for the system. All testing shall be in accordance with NFPA 72, Chapter?.
a. Before encrgi/ing the cables and wires, check for correct connectic
short circuits, ground faults, continuity, and insulation.
b. Close each sprinkler system flow valve and verify proper supervisory alarm at the
FACP.
c. Verify activation of all flow switches.
d. Open initiating device circuits and verify that the trouble signal actuates.
c. Open and short signaling line circuits and verifies that the trouble signal actuates.
f. Open and short Notification Appliance Circuits and verify that trouble signal
actuates.
g. Ground all circuits and verify response or trouble signals.
h. Check Presence and audibility of tone at all alarm notification devices.
j. Check installation, supervision, and operation of all intelligent smoke detectors using the Walk Test.
k. Each of the alarm conditions that the system is required to detect should be introduced on the system. Verify the proper receipt and the proper processing of the signal at the FACP and the correct activation of the control points
1. When the system is equipped with optional features, the manufacturer's manual should be consulted to determine the proper testing procedures. This is intended to address such items as verifying controls performed by individually addressed or grouped devices, sensitivity monitoring, verification functionality and similar.
5. Final Inspection:
At the final inspection a factory trained representative of the manufacturer of the major equipment demonstrate that the systems function properly in every respect.
a. Provide instructions as required for operating the system. Hands-on demonstrations
of the operation of all system components and the entire system including program
changes and function shall be provided.
b. The Contractor and/or the Systems Manufacturer's representatives shall provide a
typewritten "Sequence of Operation" to the owner.
Provide addressable output command points from the fire alarm panel for the following:
1. Motorized windows that shall open or close during smoke management under a fire
condition.
2. Fan control of fans involved in smoke management.
3. All motorized smoke fire dampers.
4. Door release units for fire exit doors connected to the fire panel.
5. Bach elevator.
Addressable input points to the fire panel is required for the supervision of the following;
1. Open position and closed position of molori/ed windows that shall open or close
during smoke management under a fire condition (2 input points for each window).
2, Status of fans involved in smoke management.
3, Open position and closed position of all molori/.cd smoke fire dampers (2 input points
for each damper).
4. Water flow indication of water flow switches of fire /.one valves.
Section ( 5 } Par! 3 Hecmeal Specification
5. Closed position of fire zone valves through tamper switches.
6. Closed position of Fire pumps isolating valves through tamper switches.
The lire alarm system shall be able to send SMS message of selected alarms to mobile phones, '['he BMS shall be able to send SNMP traps to HP open view software or e-mail messages.
Provide training for three personnel, for programming, commissioning, operation, testing, and trouble shooting of the system. At the end of this training the attendees shall receive a certificate from the manufacturer for the operation, programming, and maintenance of the system.
Provide four sets of manuals in hard copy and one set in soft copy for the following:
1. All system graphics; indicate the tag number of the equipment and each control point
2. All control logic; indicate the tag number of the equipment and each control name and
3. List of all control points parameters with the values used for commissioning.
4. Operator manuals for the supplied software.
5. Operation and maintenance manual.
2012.11.12