電纜施工規范資料翻譯-譯路通武漢翻譯公司
13.1.5.6 拉線與拉桿的拆除（如有必要）
拉線的恢復工作僅能在地面上進行，屆時配電網的拆除工作已經結束。拉線的拆除應通過松開兩邊平行槽的緊固螺絲完成，從而恢復鋼纜的使用。
13.1.5.7 極的挖掘
務必圍繞極的底部進行挖掘直至其基礎部分可以自由活動，然后小心吊起該極。不得在尚未松開極的基礎部分的情況下將極拔出。如果在拆除后，極仍可以恢復并可繼續使用，則必須注意拆除工作以防對極產生任何其他的損傷。
13.1.5.8 服務連接的拆除（如有必要）
在將現有客戶連接至新的網絡之前應及時通知這些客戶。先將當前所有的電氣連接都斷開，然后把地下或高空電纜移開，接下來再進行新的高架服務連接。在對現有客戶服務連接的地方，無須將接地桿移開。
13.1.5.9 工作順序
一般的工作順序應是從MV電壓線開始，然后是配電變壓器，最后才是二次網絡。承包商應注意所有客戶的服務連接�；旧�，桑尼亞國家電力公司（TANESCO）- 與承包商互相配合-將能夠處理好客戶連接的工作。
遵守區劃原則，即：先將拆除工作集中在某一各變電站及其相關電路上，然后再開展下一個電站工作。
承包商將每日報告（以及兩天的預期內容）遞交給雇主以及項目經理，指出其即將開展的活動以及開始和完成時間。
13.2 與地下電纜安裝相關的工作
13.2.1 總則
預期在達累斯薩拉姆（Dar es Salaam）安裝一根長13.2km的單核XLPE 33 kV電纜。電纜系統應連接至變電站。
•蠔灣（新的及現有的）
•伊拉臘至卡里阿庫
預計的地下電纜安排，鋪設深度，所需的電纜空間以及保護類型都在配電標準圖紙上有所表示。
在合同簽訂前，提供MV地下網絡的試驗性電纜路線�？墒�，承包商應考慮最短的LV地下電纜路徑。
Section VIII: Technical Specifications Page Vlll-108
13.1,4.5 Pins
Pins shall be checked for all accessories such as washers, nuts. When pins are removed, each pin shall be checked for stratghtness and galvanizing condition, with no deep corrosion zones.
Pins shall be classified according to:
a) Dimensions and material,
b) Condition. • .
All pins in bad condition shall be discarded with prior inspection and authorization from Project Man¬ager or his Supervision staff, to whom shall be submitted a list of discarded pins.
Pins shall be packed in numbered wooden cases in order to be transported. A list case numbers, number of pins of each type, pin condition and the case weights shall be prepared. Copies of this list shall be submitted as indicated.
13.1.4.6 Cut-Outs
MV disconnection and protection devices shall be dismantled, cleaned and classified. All units which are seriously damaged shall be discarded with prior inspection and authorization from Project Man¬ager or his supervision staff, to whom shall be submitted a detailed list of discarded units.
Elements in good condition shall be marked and packed. Each element shall have all its accessories such as fixing bracket, crossarm, bolts, nuts, washers, grounding terminals. The Contractor shall de¬termine the fuse size of ail cut-outs. A list of key numbers, brand names, types, accessories and fuse characteristics shall be prepared. Copies of this list shall be submitted as indicated.
13.1.4.7 Distribution Transformers
Distribution transformers shall be removed from poles or platforms and shall be subject of an inspec¬tion for oil leakages, damaged insulators or any other defect which requires attention before re-use and new commissioning in next construction phase.
For each transformer a report shall be prepared describing:
a) Brand name,
b) Voltages,
c) Number of phases,
d) Rating,
e) Connection group,
f) Condition (describing defects),
g) Serial number and Employer registration number.
Each transformer shall be prepared for transportation, securing all valves and protecting bushings and breathing tank.
For all transformers which have oil leakages, the oil shall be removed, while marking the points where leakage occurs. A sign indicating that transfqrmer does not contain oif shall be placed on each empty transformer. Oil shall be securely stored in drums and delivered to the Employer with a detailed list. Copies of this list shall be submitted as indicated.
Tanzania: Distribution System Reinforcement Project, Dar es Salaam, Arusha and Kilimanjaro DECON
Tender Documents for Lot 4: Plant and Equipment for 33/11 kV Overhead Lines mho/tender docs lot 4-doc
2012.10.22